Contrabass Instruments

Contrabass versions exist for almost every instrument now. Most of the newer instruments are scarcely written for and are mainly used in new music. There are a few newer companies making wind instruments that can go lower and lower. Eppelsheim makes my contraforte, as well as a very well received contrabass clarinet, tubax, and contrabass sax. Hogenhuis is popular making contrabass flutes.

Contrabass Recorders

Contrabass Flute

Contrabass Clarinet – Eppelsheim

Contrabass Saxophone

Subcontrabass Tuba

Octobass

Standing Peg for Contrabassoon, Contraforte, Bass Clarinet

Standing Contraforte

I have been jealous of bass clarinet players and contrabass flute players who are able to perform standing. It adds to the stage presence for certain pieces and is more visually interesting to watch.

  The parts that I used to make this standing peg cost under $10 and I bought it all at Home Depot.

Contra peg 2

For the Contraforte, the peg used is 3/8 inch so it was easy to find a match. I used an aluminum rod since it aluminum is easier to cut. I have my cordless reciprocating saw, Peg stock, black Duct Tape, a Rubber stopper. After cutting the peg to length based on my height, I wrapped the tape around an end to fit the rubber stop. 

Contra Peg

 

Woodwind Moisture Care

Large woodwind instruments have problems with water and condensation from regular playing. Not to mention the amount of playing that occurs in the lead in to a recital or audition. Contrabassoons are especially susceptible to water damage because they do not come apart to be swabbed, and most players cannot take their contras apart without damaging the seal when putting it back together.

Just last week I was talking to a woman who had bought a Mollenhauer contrabassoon in an estate sale. She bought half of it along with another bassoonist, and they shared it. But after a few months of playing and putting it back into the case one of them developed a cough, and through some sleuthing, found that the contrabassoon was full of mold! They brought it to a repairman who cleaned it out but it was never the same. We all heard about Trombone Lung a few years ago. This stuff can really cause respiratory ailments along the lines of Anthrax.

The best method for keeping a contrabassoon dry is to remove the tuning slide and leave it out on the stand for a few hours after playing. This won’t prevent all problems, on older contras water damage can even be seen on the outside of the instrument, through the lacquer.  The contra’s “wing joint” is the common problem, this is the first piece of wood after the first bend. The danger is mold, and that the mold can damage the seal of the instrument and eat away at the wood of the bore, changing the dimensions.

Contraforte has a bad side and a good side. The bad side is that there is no tuning slide, and so nothing can be opened to help it air out; the good side is the modular design which allows players to take apart their own instruments. I can safely loosen the C-clamps and remove a bend to clean out sections. Recently I removed the second bend for the first time to find that it was lined with mold. The first bore can air dry but after a certain point the circulation doesn’t dry out the entire bore. This means that I need to do regular checks and cleanings at least once every two months.

The best tools for preventing life in an instrument are rubbing alcohol and a dehumidifier. Find a small spray bottle capable of an extremely fine mist, as fine as an aerosol spray. fill it with rubbing alcohol and spray it down the bore when you finish playing and right before you swab (non-contra) The alcohol mist will sterilize the bore and the hard to reach tone holes with the added benefit of evaporating quickly. I even do this to my bassoon before I swab it and put it away. Having a dehumidifier drying out the air makes it difficult for mold and fungi to take hold.

Contraforte

 

Today I did a large scale cleaning by removing all bends and using a fine sprayer of rubbing alcohol. By spraying sections at a time and swabbing them I killed any mold spores and other microbes living inside.

Contraforte Contraforte Contraforte

I have recently invested in a great dehumidifier from Lowes which has improved the air quality. I highly recommend a dehumidifier for woodwind players or doublers. If you can imagine all of the moisture that accumulates in the air from playing multiple instruments and reed making, it makes it hard for things to dry out fully. Especially here in the San Francisco Bay Area there is constant fog and moisture from the sea. I have been keeping my instruments at 45% humidity, this has already stopped my problem of sticky pads.

Dehumidifier

Contraforte Stand

 

contraforte stand
contraforte stand

After a long search,  I have finally found an instrument stand for the contraforte. This was a find off of eBay and it was made by Aureum. This seems to be a generic low-woodwind stand that can adjust to fit many different instruments, it certainly fits contrabassoon on top of contraforte. The top of the stand is completely adjustable in height, width, and angle that it hold the contra. My only complaint would be that the peg cup at the bottom of the stand is too small, but I might remove it and add a different one.

I am unable to find out where this stand can be bought. It’s a company in Korea and I don’t think that they have any U.S. distributors. I have seen a few of these pop up on eBay though!

contraforte stand